Problems Relating To Images - Epson S7 User Manual

Problem Solving

Problems relating to images

No images appear
Check
Did you press the [t] button?
Are the indicators switched off?
Is A/V Mute active?
Is the A/V mute slide closed?
Are the Configuration Menu settings correct?
Is the projected image completely black?
Only when projecting computer images
Is the image signal format setting correct?
Only when projecting images from a video source
Moving images are not displayed
Check
Is the computer's image signal being output to the LCD and the
monitor?
Only when projecting images from a laptop computer or a computer
with a built-in LCD screen
Projection stops automatically
Check
Is Sleep Mode set to On?
Press the [t] button to turn the power on.
The power cable is not connected correctly or power is not being supplied normally.
Connect the projector's power cable correctly.s Quick Start Guide
Check that your electrical outlet or power source is functioning correctly.
Press the [A/V Mute] button on the Remote Control to cancel A/V Mute.s
Open the A/V mute slide.s p.9
Reset all of the settings. s Reset Menu - Reset All
Some input images, such as screen savers, may be completely black.
Change the setting according to the signal for the connected equipment. s Signal Menu - Video Signal
Change the image signal to external output only. s Check your computer's documentation.
Press the [t] button to turn the power on. If you do not want to use Sleep Mode, change the setting to Off.
s Extended Menu - Operation - Sleep Mode
Remedy
p.25
p.56
Remedy
Remedy
p.53
63
p.50