Sequentially Projecting All Image Files In A Folder (Slideshow) - Epson S7 User Manual

Making a Presentation with a Slideshow (EB-W8/X8 only)
D
If you press the [Esc] button, the file list screen is displayed
again.

Sequentially projecting all image files in a folder (Slideshow)

You can project images files in a folder sequentially, one at a time.
This function is called Slideshow. Use the following procedure to run a
Slideshow.
To change files automatically in the Slideshow, set the Screen
q
switching time to any value other than No in the Option screen.
This is set to No by default.s p.46
Procedure
A
Start a Slideshow. p.42
s
The file list screen appears.
B
Press the [ ][
to the folder for which you want to run the Slideshow, then
press the [Enter] button.
C
Select "Slideshow" on the bottom of the file list screen and
press the [Enter] button.
The Slideshow starts, projecting the image files in the folder
automatically in sequence, one at a time.
Once the Slideshow reaches the end, the screen automatically
returns to the file list screen. If Continuous Play is set to On in
the Option screen, once the Slideshow reaches the end, it is
repeated from the beginning.
While projecting a Slideshow, you can go to previous/next screen
or cancel playback.
If Screen switching time is set to No in the Option screen, the
q
files will not change automatically after you start the playback of
the Slideshow. Press the [Enter] button or the [Page] button
(Down) to project the next file.
][ ][ ] buttons to set the cursor
p.45
s
45