Functions for Enhancing Projection
Changing the aspect for computer images (EB-X8/S8/X7/S7)
When projecting images from Computer input port or HDMI input port (EB-X8 only), you can change the Aspect as follows.
Set Values
Normal
Displayed when the source is a computer.
Auto (EB-X8 only)
Displayed only when the source is
HDMI.
4:3
16:9
If parts of the image are missing, set Wide or Normal in Resolution from the Configuration Menu depending on the size of the computer panel.
q
p.50
s
Operation
Projects to the full projection size retaining the Aspect of
the input image.
Projects in an appropriate aspect based on information
from the signal being input.
Projects to the full projection size at an Aspect of 4:3. This
is ideal for when you want to project images at an Aspect
of 5:4 (1280 x 1024) to the full projection size.
Projects at a 16:9 Aspect. This is ideal for projecting at full
screen size when using a 16:9 screen.
Projection example
When a 1280x1024 signal is input
When a 1280x1024 signal is input
29