Epson S7 User Manual page 54

List of Functions
Sub Menu
Operation
Standby Mode
USB Type B
Link 21L
Language
Reset
*1 When User's Logo Protect is set to On in Password Protect, settings relating to User's Logo cannot be changed. You can make changes after setting User's Logo
Protect to Off.s p.37
*2 Except for High Altitude Mode.
Direct Power On: You can set whether or not (On/Off) to enable Direct Power On.
When it is set to On and the power cable is plugged in, be aware that the projector turns on automatically in case such as a power
outage is restored.
Sleep Mode: When set to On, this automatically stops projection when no image signal is being input and no operations are carried
out.
Sleep Mode Timer: When Sleep Mode is set to On, you can set the time before the projector automatically turns off within a range
of one to 30 minutes.
Lens Cover Timer: When set to On, this turns off the power automatically 30 minutes after the A/V mute slide is closed. Lens
Cover Timer is set to On at the time of purchase.
High Altitude Mode: Set to On when using the projector above an altitude of 1500 m.
Set to Communication On when the projector's status is to be monitored and controlled from the computer via USB communication,
even when the projector is in standby mode.
p.87
s
Set to USB Display when the projector and a computer are connected by a USB cable and computer images are projected.
s Quick Start Guide
Set to Wireless Mouse when the mouse pointer is to be operated by the Remote Control.s
Set to Page Up/Down when paging operation is to be performed with the Remote Control.s
Set to On when the projector's status is to be monitored and controlled from the computer via USB communication.s
You can set the language for message displays.
*1
You can reset Display and Operation
To return all menu items to their default settings, see s
Function
*2
from the Extended menu to their default settings.
p.56
p.34
p.36
p.87
54