Epson PowerLite Home Cinema 3010 User Manual page 34

Note: This setting cannot be used when the Color Mode is set to Auto (see page 32).
1. Press the
Gamma
2. Do one of the following:
■
Select one of the numeric correction values using the u or d button on the remote
control and press the
right. The horizontal axis represents the input signal level, and the vertical axis
represents the output signal level. Press the
■
Select
3. Do one of the following:
■
Select
the arrow buttons to move the icon to the area of brightness you want to adjust, then
press
adjustment. Press the u or d button to adjust and then press
setting and exit
■
Select
button to select the point on the graph that you want to adjust, and then use the
u or d button to adjust the settings. Press
4. Press the
34
Making Basic Adjustments
button. Select
Menu
. You see the following displayed on the screen:
Enter
. Then continue with the next step.
Customized
Adjust it from the image
The custom gamma graph appears with the channel selected for
Enter.
.
Adjust it from the graph
button to close the menu screen when you're done.
Menu
from the main menu. Select
Image
button You see the setting reflected in the graph on the
.
button to exit.
Esc
. You see a gamma icon on the projected image. Use
. When the gamma graph appears, use the l or r
Enter
Advanced
to save your
Enter
to save your setting and exit.
and then