Epson PowerLite Home Cinema 3010 User Manual page 13

Keep the projector level and place it at a height where its lens is centered between the top and
bottom of the screen. If this isn't possible, use the horizontal keystone slider and vertical
keystone buttons to adjust the image (see page 24).
Note: Image quality may be reduced if excessive keystone correction is used.
Projection distance
The size of the image is determined by the distance from the projector's lens to the screen.
Depending on your display settings and how you use the zoom ring, the actual size may differ.
Use these tables as a guide for projector placement:
16:9 aspect ratio
Projection distance
3.8 to 6.2 feet
116 to 190 cm
5.8 to 9.4 feet
176 to 287 cm
7.7 to 12.6 feet
235 to 383 cm
9.7 to 15.7 feet
295 to 480 cm
11.6 to 18.9 feet
354 to 576 cm
14.6 to 23.7 feet
444 to 721 cm
17.5 to 28.4 feet
533 to 866 cm
Offset
Diagonal image size
(width × height)
40 in. (35 × 20 in.)
101.6 cm (89 × 50 cm)
60 in. (51 × 30 in.)
152.4 cm (130 × 75 cm)
80 in. (71 × 39 in.)
203.2 cm (180 × 100 cm)
100 in. (87 × 47 in.)
254 cm (220 × 120 cm)
120 in. (106 × 59 in.)
304.9 cm (270 × 150 cm)
150 in. (130 × 75 in.)
361 cm (330 × 190 cm)
180 in. (173 × 98 in.)
457 cm (440 × 250 cm)
Diagonal image size
Offset refers to distance from
bottom of image to center of
lens.
Offset
0 in.
(0 cm)
0 in.
(0 cm)
0 in.
(0 cm)
0 in.
(0 cm)
0 in.
(0 cm)
0.3 in.
(1 cm)
0.3 in.
(1 cm)
Setting Up the Projector
13