Epson Digitial Camera User Manual page 29

2
Locate the port cover on the side of the camera. Press on the arrows
and slide the cover down to open it.
3
If you're using the cable in the Mac Connectivity Kit, line up the
arrow on the white end of the cable with the notch on the camera's
serial port. Then insert the connector. Continue with step 5.
3-2
Using PhotoPC with Your Macintosh
If you're using the PhotoPC Mac version, you'll have a short Mac
adapter cable in addition to the long PhotoPC cable. Connect the
smaller end of the long cable to the camera's serial port as shown.
arrows
4
If you're using the PhotoPC cable that came with the camera,
connect it to the Mac adapter cable as shown, and tighten the
connector screws.
notch
TITLE
Cam3-02.eps
EPSON AMERICA, INC.
DATE
Mac adapter
serial port
arrow
PhotoPC cable