Erasing Pictures; Checking The Picture Counter - Epson Digitial Camera User Manual

Epson user's guide digitial camera
Table of Contents

Advertisement

Erasing Pictures

If you don't want to keep the last picture you took, you can
erase it from the camera's memory. Using a small pointed
object such as a ballpoint pen, press the erase button on the top
of the camera. The erase icon on the control panel flashes when
you press the button.
timer
After a few seconds, the last picture you took is erased from the
camera's memory. The picture counter (number of pictures taken)
decreases by one. You can continue pressing the button to erase more
pictures.
TIP
You can also erase all the pictures in the camera's memory. While
holding down the erase button, press the timer button. The erase icon
flashes until all pictures are deleted.

Checking the Picture Counter

erase
As shown below, the large number in the center of the control panel
displays the number of pictures you have taken. The smaller number on
the left shows how many additional pictures you can take.
The number of pictures remaining depends on your resolution settings. If
you switch between standard and high resolution, the number of pictures
remaining changes. For example, if the number of pictures remaining is
2 at high resolution, it changes to 4 when you switch to standard
resolution.
pictures taken
pictures remaining
Taking Pictures with PhotoPC
2
AUTO
A
2-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Photopc mac

Table of Contents