Table of Contents
Advertisement
After you take the picture, the LCD monitor comes on
momentarily, displaying the picture you just took, and
appears on the bottom left of the LCD monitor. At this
time, you can specify the number of prints by pressing the
print button. To take another picture, press the function
button, then repeat steps 4 through 6.
Note:
For more information on specifying the number of prints,
see "Making Print Settings" on page 58.
After you are finished taking pictures, you can view the
pictures you took, delete them, and make print settings. See
Chapter 3 "Viewing and Managing Your Photos".
Setting the flash
You can choose between three flash functions: Flash Auto,
Flash Off, and Red-eye Reduction. To change the setting,
follow the steps below.
1. Turn on the camera by sliding the OPEN switch to open
the lens cover.
Note:
For more information on turning on the camera, see "Turning
the camera on and off" on page 27.
- 49 -
2
Advertisement
Table of Contents
