Table of Contents
Advertisement
6. Press the
the LCD monitor.
Note:
To cancel this setting, press the
back to the right.
7. Once you are finished making the setting, take a picture.
Note:
If you want to take a picture of a person or persons in a
nightscape, set the flash function to
the images of your subject and the background. We recommend
that you use tripod for stability.
Set the flash function to
the image of a nightscape.
You can take pictures using the viewfinder instead of the LCD
monitor. See "Taking Pictures Using the Viewfinder" on page
47.
button. The
(off) when you want to capture only
- 45 -
icon moves to the left side of
button again. The icon goes
(auto) to capture both
2
Advertisement
Table of Contents
