Gateway 600 Service Manual page 67

Replacing Gateway 600YG2 Components
To replace the speakers:
1
Disconnect the AC adapter and modem and network cables and prepare
the notebook by following the instructions in
on page
2
Disconnect the notebook from the optional port replicator by following
the instructions in
3
Turn the notebook over so the bottom is facing up.
4
Remove the main and optional secondary batteries by following the
instructions in
5
If the notebook has IEEE 802.11 wireless networking built in, remove the
IEEE 802.11 Mini PCI module by following the instructions in
the IEEE 802.11 Mini PCI card" on page
6
Turn the notebook over so the top is facing up.
7
Remove the keyboard cover by following the instructions in
the keyboard cover" on page
8
Remove the keyboard by following the instructions in
keyboard" on page
9
Remove the hinge covers by following the instructions in
hinge covers" on page
10
Remove the LCD panel by following the instructions in
LCD panel assembly" on page
11
Remove the palm rest assembly by following the instructions in
the palm rest assembly" on page
62
4.
"Disconnecting from the port replicator" on page
"Removing the batteries" on page
31.
37.
www.gateway.com
"Preparing your work space"
15.
28.
39.
46.
8.
"Replacing
"Replacing
"Replacing the
"Replacing the
"Replacing the
"Replacing
7.