Craftsman 172.79183 Operator's Manual page 17

POWER SWITCH LEVER
Toturn Edger ON, p ress inthe PoWerSafety Lock-Off Switch
a nd squeeze the Power
Switch Lever (Fig. 9a). As soon as Edger startsup you can release the Power Safety
Lock-Off Switch (Fig. 9b). The Power Switch Lever has been designedso that it is very
easy to hold in the ON position.To turn to01OFF, simplyrelease Power Switch Lever.
Fig. 9a
I NOTE: The Edger is a majorappllance arid should not be opemte¢l
J simultaneously with other major appliances on the same Imuseh01d ¢ircu|L •
f
CUT LINE INDICATOR
Your Edger has a Cut Line Indicator
located on top of the door of the
Blade Guard. This shows the location
of the Cutting Blade and enables you
to position the Edger properly (Fig, 10).
Fig; 10
Cut.Line
lrtdtcatQr
• 31
r
17