Completing The Setup - Garmin -Asus A10 Owner's Manual

1. Plug the vehicle power cable
the power connector on the side of
the cradle .
➋
➊
➋
2. Remove the clear plastic from the
suction cup
➌
3. Clean and dry your windshield
and the suction cup with a lint-free
cloth.
4. Place the suction cup on the
windshield.
5. Flip the lever
windshield.
6. Snap the cradle onto the suction
cup arm.
7. Fit the gold contacts on the left side
of the device into the cradle.
Garmin-Asus A10 Owner's Manual
➊
➍
.
back, toward the
➍
8. Tilt the device back until it snaps
into
into the cradle.
➌
9. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle.
TiP: To learn how to remove the
device from the mount, see

Completing the Setup

Complete the following optional tasks
to finish setting up your device:
• Set up voice mail
• Set up an e-mail account
• Synchronize the device
Getting Started
page 113.
(page 20).
(page 57.
(page 90).
5