Mounting Your Device; Completing The Setup - Garmin NuviFone A10 Quick Start Manual

Mounting Your Device

Warning

This product contains a lithium‑ion battery.
To prevent the possibility of personal
injury or product damage caused by battery
exposure to extreme heat, remove the
device from the vehicle when exiting,
or store it out of direct sunlight.
1. Plug the vehicle power cable into the
power connector on the side of the
cradle.
2. Remove the clear plastic from the
suction cup.
3. Clean and dry your windscreen and the
suction cup with a lint‑free cloth.
4. Place the suction cup on the
windscreen.
Suction
cup arm
Cradle
Vehicle power cable
nüvifone A10 Quick Start Manual
Lever
5. Flip the lever back, towards the
windscreen.
6. Snap the cradle onto the suction cup
arm.
7. Fit the gold contacts on the left side of
the device into the cradle.
8. Tilt the device back until it snaps into
the cradle.
9. Plug the other end of the vehicle power
cable into a power outlet in your
vehicle.

Completing the Setup

Complete the following optional tasks to
finish setting up your device:
• Set up voice mail
• Set up an e‑mail account.
• Synchronise the device with your
computer.
(page 8).