Craftsman 917.249980 Owner's Manual page 5

BAGGER SUPPORT
ASSEMBLY
(See Fig. 1A)
1. Your tractoralready has four (4) shoulder bolts installed
on the rear d rawbar, simply hang the support assembly
on the bolts,
SUPPORT
ASSEMBLY
SHOULDER
BOLTS
FIG. 1A
TO REMOVE THE SUPPORT ASSEMBLY (See Fig. 2)
t. Pull outward on the stop bracket enough to allow support
assembly to be lifted up and away from drawbar.
PULL OUT ON STOP BRACKETTO
REMOVE SUPPORT ASSEMBLY
02643
FIG. 1B
MOUNTING COVER ASSEMBLYTO
SUPPORT ASSEMBLY (See Fig. 2)
NOTE: For ease of assembly, you may wish to obtain the
assistance of another person for mounting cover assembly
to tractor.
t. Position cover assembly on ground behind tractor as
shown.
2. Lift and rotate cover to align cover bracket with support
assembly.
3. Slide cover assembly down onto the support
assembly.
..... _":'_ I
COVER
ASSEMBLY
SUPPORT
ASSEMBLY
02646
5 FIG. 2