Using The Control Functions; Carrying Out Control Using Control Buttons - Epson V4.22 Operation Manual

Using the control functions

Carrying out control using control buttons

Click the icon of a projector to be controlled in "Grouping view" or "Detail
list view", and click a control button to enable control of only that selected
projector.
You can also enable control of all selected projectors by selecting more
than one projector in "Grouping view" or "Detail list view" and clicking a
control button. The methods of selecting more than one projector at the
same time are as follow.
• If you select a group icon in "Grouping view", all projectors that have
been registered in that group and that are set to be monitored can be
controlled at the same time.
• Hold down the [Ctrl] key on the keyboard while clicking on the desired
icons.
• Use drag and drop to select a range of desired icons.
The following table shows the meanings of the control buttons.
Power On
Power Off
Switch source
Computer 1
Switch source
Computer 2
Switch source
BNC
Switch source
S-Video
Switch source
Video(RCA)
Switch source
Video(BNC)
Control buttons
Switch source
DVI, HDMI
Switch source
D-Video
Switch source
EasyMP
Turns the projector power on.
Turns the projector power off.
Switches the input source to the [Computer1] port
or [Computer] port.
Switches the input source to the [Computer2] port.
Switches the input source to the [BNC] port.
Switches the input source to the [S-Video] port.
Switches the input source to the [Video] port or the
[Video 2] port.
Switches the input source to the [Video1] port.
Switches the input source to the [DVI] port or
[HDMI] port.
Switches the input source to the [D4] port.
Switches to EasyMP or EasyMP.net.
26