Displaying Projector Properties; Displaying And Deleting Logs; Displaying Logs; Deleting Logs - Epson EMP Monitor V4.21 Operation Manual

Monitoring window layout

Displaying projector properties

f
Right-click on a projector icon in "Grouping view" or "Detail list view"
and select "Property".

Displaying and deleting logs

In your web browser, you can check a transmission log of content such as
what has been controlled by the EMP Monitor, projector errors. You can
delete logs once you have checked them.
TIP
When "Log output" is set to "On" at "Environment setup" in the
"Tool" menu, transmission logs are stored. The default setting is
"Off".

Displaying logs

f
Displays the
projector firmware
PROCEDURE
version.
Select "Log" - "show" from the "View" menu.
The web browser will open and the communication logs up until that
time will be displayed.

Deleting logs

f
PROCEDURE
Select "Log" - "Delete" from the "View" menu.
When the confirmation message is displayed, click [OK].
All logs will be deleted and details of EMP Monitor control
operations and details of projector errors from that point onward will
be recorded in a new log.
25