Advertisement
Positioning
Detachable
Blower
(Power Head Assembly)
1. Locate
the detachable
blower
of your
Craftsman
wet/dry
vac.
2. On top of the blower
(opposite
the han-
dle side of the blower);
there is molded
plastic
lead that is used to assist
assembling
the unit. Position
the lead
into the indented
area above
the label.
Molded
Plastic Lead
ndented
Area
3. Rotate
the detachable
blower
down
until the travel of the unit stops.
4. Lightly
press
down on the carry
handle
of the detachable
blower
until the power
head
latch engages
the blower.
The
detachable
blower
is now latched
to the
lid assembly.
/
fq
c
Your new wet/dry
vac is ready for use.
With the wet/dry
vac completely
assem-
bled and ready for use, insert the push but-
ton end of the hose assembly
into the inlet
of the vac. The hose should
snap into
place. To remove
the hose from the vac
press the release
button
in the hose
assembly
and pull the hose out of the vac
inlet.
Release
Button
_
Press and
Pull
Advertisement
