Full One Year Warranty - Craftsman ETT3012H Owner's Manual

FULl ONE YEAR WARRANTY
If tills product fails due to a defect in matedal or workmanship within
o_e year from the date of purchase, return it to your nearest Sears
store or Craftsman outlet, and it ",,,'ill be replaced free o[ charge,
If this product is used for commercia! purposes, this warranty applies
for only 90 days from the date of purchase,
This warra+n[y gives you specif_c iegal rights, and you may also have
other rights which vary from stale to state,
Sears, Roebuck and Co., Dept. 8t7 WA, Hoffman Estates, IL 60178
,_b,,_. WARNING: Read and understand
ali instructions, Failure to follow all
inslructions i_sted below may result in
eteclric shock, fire and/or +serious personal
injury. SAVE THESE INSTRUCTIONS.
" Keep work area dean and well-lit,
Cluttered benches and dark areas invite
accidents.,
,, Avoid e_ectrica! hazards, fire hazards, or
damage to the tool, use proper circuit
protection, Your nailer is wired at the
faclory for !20V operalion. Connect to a
I20V, I5A branch circL_it and use a 15A
time delay fuse or circui:l breaker. To
avoid shock or fire, replace power cord
immediately if it is worn, cut or
damaged in any way
, Guard against electrical shock, Be sure
your body does not c_ome in contact
with grounded surfaces suci) as pipes,
radiators, ranges, _efdgeralors, etc+
• Avoid dangerous work area
environment, Do not use power tools in
damp or wet locations. Keep work area
well lit,, Do not expose power tools to
reign. Do not use power tools in the
preser_ce of flammable i[quids or gases
• Keep ch+fdren: away. All visitors should
wear safety goggles; or safety glasses
with :side shields and be kept a safe
distance flora work area.
Do not let. visitors come #i contact with
tool or extension cords,
• Store idle io_31so When not in use, slore
too+s in a high, dry loca!.ion that cart be
locked. Keep them out
of
the reach of
children.
• Don*t force the too!, _t wil_ do the job
better and safer if used at the rate for
which it was desfgned,
• Use the right toot. Do not use a focal for
a pu_rpose it was not intended. For
examplle, do not force a small Io0i or
attachment to do the job of a heavy-
duty tool,
• Always wear safety goggles or safety
glasses with side shields when using
power tooIs+ Also use a face mask or
dust mask if the job is dusty,
• Don*! abuse tool power cord. Never
carry Ihe tool by the cord or yank the
cord to disconnect it from the wall, Keep
the cord away from heat, oil, and! sharp
edges.
, Secure work. Whenever possible, use
clamps or a vise to hold Ihe work It's
safer than using your hands and it frees
both hands to use the tool:.
• Don't overreach, Keep proper footing
and balance; make sure your footing is
stable+
2