Craftsman ETT3012H Owner's Manual page 6

HOWTO LOAD YOUR NAILER
,_I_WARNING: Do r;et allow familiarity e,f
your nailer to make you careless,
Remember that a careless fraction of a
second is sufficient to inllict severe injury.
1. Turn off thu power swiicl) and unplug
nailer from power source.
2. Use only brad nails recommended; sea
Specifications on page 5.
3. Pull the loading lever (2) l.oward the
back of the nailer until i! locks into
placer
4L Position the nailer exposing ti_e clear
magazine cl_amber (t).
5, Load brad nails into the magazine(I),
nail points facing down toward the
bottom of the nailer,
6. When using different lengths, Load so
the brad nail points are at the bottom
o[ [lie magazine (1),
7. Close magazine by pulling back and
pushing forward on the loading lever (2),
making sure the brad nails stay seated
in the 1rack, Releasing the loading lever
will engage tension lever (3) and move
the brad nails into firing position,
keeping tension on them
2
TO NAIL
,_WARNING: Always wea_ safety
goggles or safety glasses w;th side shields
when operating your nai]er, Failure to do so
could resul_i[ in objects being thrown into
your eyes, resulting in possible serious
injury
1, Plug nailer-into 120 Volt, 60Hz
power outfeL
2, Turn on lhe power swilch on l.he back
of f_he nailer
3 Sei force selector knab to a middle
position.
4, Hold _laifer [imily with the tacking
mouth {1) flat to the wo_kpiece,
5. Use en.,ough downward pressure to
depress the safety lock pin (2),
NOTE: "The salary tack pin mus! be
depressed for this r_ailer to operate. TMs
nailer will not [.:ireunless this is done, To
protect the working surface, use nozzle
protect.or _,oavoid shooting rna_ks left a_ter
nailirtg..
6, Squeeze the trigger (3) to drive the
brad nail.
7_ To decrease !he lorce the brad nail is
driven into the material, hJrn the force
seleclor k nob cou nlerc]ockwise toward
lhe _'-" on the l<neb. To increase driving
force, tu.rn the knob clockwise towards
the "+" symbol on the knob
8 tf the workplace is very hard, press
down on the i'_ousing cap (4) with your
free hand.
NOTE: AVOID BLANK SHOTS to prevent.
wear and damage to internal paris.
,_LWARNING: To avoid personal injury.
keep: fingers off the trigger until ready to
drive brad nail, Do not point the nailer at
anyone when the brad nails are loaded.
6