Mounting Wood Shape; Plugging In Motor - Sears 113.239201 Owner's Manual

Part Name
Item Qty,
A Leg .... .......... _ 4
B e Screw, TrussHd. l/4_20xS]8 .,. ..... .,... 28
C • Nut. Hex 1/4_20 , .. ..................... 28
D Lockwasher, _/4 E xternat ................ 28
E Channel. Support ........................ 2
F Stiffener ............................... 2
G Stiffener, Side ........................ 2
H Stiffener, End .......................... 2
j o Screw, Pan Hd•Ty. A N8 × t/2 ............ 4
K o Nut. Hex Hd. 1/2-13 .................... 8
L • Foot, Leveling ......................... 4
• These parts contained in Loose Parts Bag No. 72031•
IL
GUARD PLAT_
SHAPER
ON MOUNT,NG WOOD FLOOR STAND
_' t, Three mounting holes are provided in the base of the
:shaper for the purpose of moundng it securely on a
substantial tool stand with screws or bolts,
2. The t0ol:stand should be high enough so the top surface
of the:shaper table wilt be '35 to 37 inches: above the
floor. The Shaper must be mounted to allovy the motor
to overhang:_ear edge Of tooi stand, :
CAUTIONi The on a
Substantial toot:: stand andi: secured so:ithere: is _ no
: possibility of tlpping;The Shaper:must be positioned on
the tool stand so that the spindle pulley is guarded from :
: : ' the bottom:
: :i' :" i:/:: ::: i ' 'i: :::: "......................
PIace the Shaper On: the Steel LEGS. Position as shown,
and align mounting h01es_ Secure with 3 e& 5/16"x 18
x 3" screws; washers and nuts.
NO, 8 x 1/2 IN.
PAN HD. SCREW
(SUPPLIED WITH LEG SET)
PLUGGING IN MOTOR
1, Find plastic cable hanger from among the loose parts.
2, Route the motor cord behind the motor mount, across
the top of the Leg Set and plug it into the receptacle in
the side of the switch box.
3. Bring the power cord alongside the motor
cord.., wrap the plastic cable hanger around the cords
and attach the hanger to the top of the Leg Set.
CABLE
HANGER
CORD
MOTOR CORD
lO