Table of Contents
Advertisement
Available languages
Available languages
barhas been d emonstrated
tosignif-
icantly reduce thenumber and seri-
ousness ofkickbacks
when t ested i n
accordance
with ANSI B175.1.
___& Small Radius
Tip Guide Bar
L_J
Large Radius {_
Tip Guide Bar
• Low
Kickback
Chain
has
met kick-
back
performance
requirements
when
tested
on the representative
sample
of these
chain
saws
speci-
fied
in ANSI
B175.1.
Low Kickback
Chain
/
Contoured
Depth Gauge
,l_l_t_-..
-_
Elongated
Guard Link
_.
Deflects
Kickback
Force
_
And Allows Wood To
"_./"
Gradually
Ride Into Cutter
SAFETY
NOTICE:
Exposure
to vibra-
tions through prolonged
use of hand
tools could cause blood vessel or
nerve damage in the fingers, hands,
and joints of people prone to
circulation
disorders
or abnormal
swelling.
Prolonged
use in cold weath-
er has been linked to blood vessel
damage
in otherwise
healthy people. If
symptoms
occur such as numbness,
pain, loss of strength,
change in skin
color or texture, or loss of feeling in the
fingers, hands, or joints, discontinue
the use of this tool and seek medical
attention. An anti-vibration
system
does not guarantee
the avoidance
of
these problems.
Users who operate
power tools on a continual
and regular
basis must closely monitor their physi-
cal condition
and the condition
of this
tool.
DOUBLE
INSULATION
CONSTRUCTION
This unit is double insulated to help pro-
tect against electric shock. Double in-
sulation construction consists of two
separate "layers" of electrical insulation
instead of grounding.
Tools built with this insulation system are
not intended to be grounded.
No
grounding means is provided on this
unit, nor should a means of grounding
be added to this unit. As a result, the ex-
tension cord used with this unit can be
plugged into any polarized 120 volt elec-
trical outlet.
Safety precautions must be observed
when operating any electrical tool. The
double insulation system only provides
added protection against injury resulting
from an internal electrical insulation
failure.
_lJ WARNING:
All electrical
repairs
to this unit, including
housing,
switch,
motor, etc., must be diagnosed
and re-
paired by qualified service
personnel.
Replacement
parts for a double insu-
lated appliance
must be identical to the
parts they replace. A double insulated
appliance
is marked with the words
"double
insulation"
or "double insu-
lated". The symbol []
(square within a
square) may also be marked on the
appliance.
Failure to have the unit re-
paired by Sears service personnel
can
cause the double insulation
construc-
tion to become
ineffective
and result in
serious
injury.
STANDARDS:
This product is listed by
Underwriters
Laboratories,
Inc. in ac-
cordance with UL Standard
1662.
SAVE THESE INSTRUCTIONS
dt_WARNING:
Before using chain
saw, ensure all fasteners are secure.
CARTON
CONTENTS
Model 358.341040
• Chain Saw (fully assembled)
• Bar Sheath
Examine
parts for damage.
Do not use
damaged
parts.
NOTE: If you need assistance
or find
parts missing or damaged,
please call
1-800-235-5878.
ASSEMBLY
Your saw is fully assembled;
no as-
sembly is necessary.
Hide quick links:
Advertisement
Table of Contents
