Craftsman 580.676661 Owner's Manual page 14

OWNER'S RESPONSIBIUTtES
Follow the hourly or calendar intervals, whichever occurs first.
More frequent service is required when operating in adverse conditions noted below.
MAINTENANCE SCHEDULE
FILL IN DATES AS YOU
COMPLETE REGULAR SERVICE
MABNTENANCE TASK
PRESSURE WASHER
Check/clean water inlet screen
Check high pressure hose
Check detergent hose
Check spray gun and assembly for leaks
Purge pump of air and contaminants
Change pump oil
Prepare pump for storage below 32°F
ENGINE
Before
Each Use
x _
x
x
x
x
OPERATING INTERVALS
Every 25 Every 50
Hours or Hours or
Yeady Yearly
x
See Storage on pages 19-20.
Every 100
Hours or
Yearly
100-300
Hours
SERVICE DATES
Check oil level
Clean debns
Change engine ell
Service air cleaner
Service spark p_ag
Service spark arrester
Clean cooling system
Clean combustion chamber
Prepare for storage
X
X
X 2
X_
X
X
X _
If unit is to remain idle for longer than 30 days
Clean if dogged. Replace if perforated or torn.
Change oil after the first (5) operating hours and every 50 hours or yearty thereafter.
Change sooner when operating under dirty or dusty conditions.
Reptace more often under dirty or dusty conditions.
GENERAL RECOMMENDATIONS
Regular maintenance will improve the performance
and extend the life of the pressure washer. See any
authorized Sears dealer for service.
The pressure washer warranty does not cover items
that have been subjected to operator abuse or
negligence. To receive full value from the warranty,
the operator must maintain pressure washer as
instructed in this manual including proper storage as
detailed in "Storage" on pages 19-20.
Some adjustments will need to be made periodically to
properly maintain your pressure washer.
All service and adjustments should be made at least
once each season. Follow the requirements in the
"Maintenance Schedule" chart above.
NOTE: Once a year you should clean or replace the
spark plug and replace the air filter. A new spark plug
and clean air filter assure proper fuel-air mixture and
help your engine run better and last longer.
EMiSSiON CONTROL
Maintenance, replacement or repair of the emission
control devices and systems may be performed by any
non-road engine repair establishment or individual.
BEFORE EACH USE
1. Check engine oil level.
2. Check water inlet screen for damage.
3. Check in-line filter for debris.
4. Check high pressure hose for leaks.
5. Check chemical filters for damage.
6. Check gun and nozzle extension assembly for
leaks.
7. Purge pump of air and contaminants.
PRESSURE WASHER
Cban Debris
Daily or before use, clean accumulated debris from
pressure washer. Keep linkage, spring and controls
clean. Keep area around and behind muffler free from
any combustible debris.
14