Features - Craftsman 315.115740 Operator's Manual

KNOW YOUR RECIPROCATING SAW
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
BLADE CLAMP LEVER
The saw has a blade clamp design that does not require
the use of a tool (blade wrench) when installing or
removing the blade. Simply lift blade clamp lever, located
on the side of the saw, insert blade between blade clamp
and saw bar as far as possible, then release lever to lock
position.
HEX KEY STORAGE
A hex hey storage slot is conveniently located on the bottom
portion of the saw handle. Insert the provided hex key into
the storage slot when not in use.
LOCK-OFF BUTTON
The saw is equipped with a "lock-off" button which
reduces the possibility of accidental starting. The lock-off
button is located on the handle above the switch trigger.
You must depress the lock-off button in order to pull the
switch trigger. The lock resets each time the trigger is
released.
NOTE: You can depress the lock-off button from either the
left or right side.
SWITCH TRIGGER
To turn the saw ON, depress the lock-offbutton and then
depress the switch trigger. Release switch trigger to turn
the saw OFF.
VARIABLE SPEED
The saw has a variable speed switch that delivers higher
speed with increased trigger pressure.
CHARGER
The charger has a convenient"key hole"hanging feature.
Screws should be installed so that the center distance is
4-1/2 in.
LED WORKMGHTS
Two LEDs located on the front of the tool illuminate when
the switch trigger is depressed, providing extra light for
increased visibility at the line of cut.
9