Symbols - Craftsman 315.115740 Operator's Manual

Some ofthefollowing symbols m aybeusedonthistool.Please s tudy themandlearn theirmeaning. Proper
interpretation ofthese symbols w illallow youto operate t hetoolbetter andsafer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
"%" Alternating Current Type of current
Direct Current Type or a characteristic of current
no No Load Speed Rotational speed, at no load
[] Class II Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert Do not to rain in locations.
expose
or use
damp
Read The Operator's Manual To reduce the risk of injury, user must read and understand
operator's manual before using this product.
O Always wear safety goggles or safety glasses with side
Eye Protection
shields and a full face shield when operating this product.
_, Safety Precautions that involve your safety.
Alert
Failure to keep your hands away from the blade will result in
No Hands Symbol serious personal injury.
No Hands Failure to keep your hands away from the blade will result in
Symbol
serious personal injury.
No Hands Symbol Failure to keep your hands away from the blade will result in
serious personal injury.
No Hands Symbol Failure to keep your hands away from the blade will result in
serious personal injury.
Hot Surface To reduce the risk of injury or damage, avoid contact with
any hot surface.
6