Table of Contents
Advertisement
G
The 3 Display Levels
Main Level
Changing the Display Level :
v Press the Menu + key.
The display changes to the next level.
If you do not press another key within 2 minutes, the main level
appears automatically on the display.
4. Quick Reference Operating Instructions
1. Create control plan :
v Enter the data for the watering programmes on the control plan
(see Appendix).
2. Label irrigation valves
v Label the irrigation valves and radio switches corresponding to
and radio switches :
the channels of the watering plan using the stickers provided.
3. Put Central Radio Control
1. Mount aerial.
Unit into operation :
2. Connect the Central Radio Control Unit to the mains via the
power pack and insert the batteries (use 1.5-volt alkaline AA
batteries only).
The batteries prevent loss of data if a power failure occurs.
1. Set the hours using the ▲-▼ keys and confirm by pressing
4. Enter current time
and day of the week :
the OK key.
2. Set the minutes using the ▲-▼ keys and confirm by pressing
the OK key.
3. Set the day of the week using the ▲-▼ keys and confirm
by pressing the OK key.
5. Register Receiver :
1. Press the Setup key (e.g. using the tip of a pen).
2. Insert batteries in just
– or – just one Radio Switch.
3. Set channel number(s) using the ▲-▼ keys and confirm
by pressing the OK key.
4. Repeat steps 1 to 3 for each receiver until you have registered
all receivers.
6. Set the Control Programme
1. Press the Menu + key twice.
(
PROG
) :
2. Select the programme memory location using the ▲-▼ keys
and confirm by pressing the OK key.
22
Time Level
Programme Level
one Radio Receiver
1. Set the hours for the programme start time using the ▲-▼ keys
7. Set programme start time
(
) :
and confirm by pressing the OK key.
START-TIME
2. Set the minutes for the programme start time using the ▲-▼
keys and confirm by pressing OK.
1. Set the hours for the programme run time using the ▲-▼ keys
8. Set the programme run time
(
RUN-TIME
) :
and confirm by pressing OK.
2. Set the minutes for the programme run time using the
▲-▼ keys and confirm by pressing OK.
9. Set the watering days :
Every 2nd or 3rd day:
v Set the arrow L to 2
by pressing OK.
Any day of the week :
v Set the arrow L to the correct day using the ▲-▼ keys and
confirm the day by pressing OK.
1. Set the arrow V to the channel you require using the ▲-▼ keys
10. Assign the programme
to the channels :
and activate the channels by pressing OK.
2. Press Menu + to return to the program selection screen.
11. Manual Operation :
1. Press the Man On / Off key.
2. Set the V to the channel using the ▲-▼ keys and open or close
the channel by pressing OK.
The opening time is set to 30 minutes as a default but the opening
time can be set manually as required (see 8.1 Opening / Closing
Channel Manually ).
5. Creating a Control Plan
v Enter the data of the watering programme in the control plan
(see appendix).
Example of a Control Plan :
Receiver
Channels
PROG START-TIME RUN -TIME
1
1
5:00
Sprinkler-
2
2
7:00
System
3
3
18:00
4
19:00
Micro-Drip-
4
System
5
6:00
Lightline
5
6
20:00
7
9:00
Pond
6
pump
8
13:00
Garden
M
–
–
pump
using the ▲-▼ keys and confirm
nd
rd
or 3
3rd
2nd Mo Tu We Th Fr Sa Su Sensors
1:00
X
1:00
X
1:00
X
0:30
X
X
X
X
X
X
X
0:30
X
X
X
X
X
X
X
2:00
X
X
X
X
X
X
X
3:00
X
X
X
X
X
X
X
5:00
X
X
X
X
X
X
X
–
G
1
1
1
4
4
–
–
–
–
23
Advertisement
Table of Contents
