Assembly And Adjustments - COMPANION 320.10831 Operator's Manual

ASSEMBLY AND A DJUSTMENTS
I 1_ WARNING: Remove the circular saw from the carton and examine fl
carefully. Do not discard carton or any packaging material until all parts
are examined•
Z_ WARNING: If any part of Ihe saw is missing or damaged, do not plug I
the circular saw in until the damaged part is repaired or replaced.
I
A_ WARNING: To avoid injury,ALWAYSturn the b"WgCh OFF and disconnect
the circularsaw fromthe poweroutlet beforeinstatllngor changingthe saw bade.
INSTALLING THE SAW BLADE (FIG. 4)
Fig. 4
1. Rotate Ihe saw blade by hand and depressthe spindle lockbuttonunlil
the blade locks.
2. Unsmewthe hexagon blade screw usingthe wrenchprovided.
3. Remove Ihe outer blade flange and the hexagon blade screw.
8