Extension Cords - COMPANION 320.10831 Operator's Manual

The f ollowing recommended
accessories are currently
availabioat your local Sears Store.
Z_ WARNING: The use ofattachments or accessories that are
not recommendedmightbe dangerous
EXTENSION CORDS
Sears offersa largeselectionof extensioncordsthat helpextend yourworking range.
The use of any extension cord will cause some loss ot power.To keep the loss at a
minimum and to prevent overheating, use an extension cord that is heavy enough to
carry the current that the tool will draw.
A wire gauge (AWG) of at least 14 is recommendedfor an extensioncord 25 feet
or less in length.When workingoutdoorsALWAYS _se an extensioncord that is
suitablefor outdooruse.The cord's jacketwill be markedWA.
A_ CAUTION: Keep extension cords away from the cuffing area, and position the
cord so il will not get caught during operation,
A_ WARNING: Check extenslo_ cords before each use. If damaged, replace it
immediately, NEVER use a tool with a dampged cord because touching the
damaged area could cause eledrical shock, resulting in serious injury.
BLADES
Sears has a large selection of circular saw blades for fast, efficient cuffing in a variely
cf materials and applications.
7 1/4-1n. 40-Touth General-Purpose Cut-Off Blade
7 114-1n, 35-Touth Master Combination Blade
7 114-in. 2DO-Tooth Plyv,,ond Blade
7 l14-1n. 18-Tooth Carbide Blade
7 114-1n. 18-Tooth Mach II SIIve_ Series Carbide Blade
7 1/4-1n. 24-Tooth Maeh It Silver Series Carbide Blade
7 l14-in. 24-Tooth Combtnation Carbide Blade
Sears also offers Combination Squares, Framing Squares and various length
Edge Guides to help you with all your cutting needs
11