Advertisement
A
WARNING:
Read and understand all
instructions. Failure to follow all instructions listed
below, may result in electric shock, fire and/or
serious personal injury.
SAVE THESEINSTRUCTIONS
WORKAREA
•
Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids or gases. Power tools may create sparks
which may ignite the dust or fumes..
ELECTRICAL
SAFETY
•
Don't expose power tools to rain. Water entering a
power tool will increase the risk of electric shock or mal-
function.
PERSONAL
SAFETY
•
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use tool while tired or under the influence of
drugs, alcohol, or medication. A moment of inatten-
tion while operating power tools may result in serious
personal injury.
•
Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep your hair, clothing,
and gloves away from moving parts and exhaust.
Loose clothes, jewelry, or Iong hair can be caught in
moving parts.
•
Do not overreach. Keep proper footing and bal-
ance at all times. Proper footing and balance enables
better control of the tool in unexpected situations. Do
not use on a ladder or unstable support.
•
Use safety equipment. Always wear eye protection.
Dust mask must be used for appropriate conditions.
TOOLUSE
AND CARE
•
Do not use tool if switch does not turn it on or off.
Any tool that cannot be controlled with the switch is
dangerous and must be repaired.
•
Store idle tools out of the reach of children and
other untrained persons. Tools are dangerous in the
hands of untrained users.
Maintain tools with care. Keep cutting tools sharp
and clean. Properly maintained tools with sharp
cutting edges are less likely to bind and are easier to
control.
•
Check for misalignment or binding of moving
parts, breakage of parts, and any other condition
that may affect the tool's operation. If damaged,
have the tool serviced before using. Many accidents
are caused by poorly maintained tools.
•
Use only accessories that are recommended
by
the manufacturer for your model. Accessories that
may be suitable for one tool, may become hazardous
when used on another tool.
SERVICE
•
Tool service must be performed only by qualified
repair personnel. Service or maintenance performed
by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replace-
ment parts. Follow instructions in the Maintenance
section of this manual. Use of unauthorized parts or
failure to follow Maintenance Instructions may create a
risk of electric shock or injury.
Hold tool by insulated gripping surfaces when performing an operation where the tool may contact hidden
wiring or its cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
ADDITIONAL
RULES
FOR SAFE OPERATION
•
•
Do not allow children to operate Hand Vac or play
with Hand Vac as a toy. Close attention is necessary
when used near children.
•
•
This Hand Vac is intended for household use ONLY.
•
Use this Hand Vac ONLY for its intended use as
described in this manual. Use only the attachments
recommended in this manual.
If Hand Vac is not working properly, has been
dropped, damaged, left outdoors, or dropped into
water, return to your nearest Sears Service Center.
Do not abuse cord. Never carry charger or base by
the cord or yank to disconnect from electrical outlet.
Grasp charger, not the cord, and pull to unplug. Do not
allow cord to hang over edge of table or counter or to
touch hot surfaces.
3
Advertisement
