Install Software - Epson Stylus NX400 Series Start Here Manual

6

Install software

Your software works with Windows
Windows Vista
Windows
1
Make sure the NX400 Series is NOT CONNECTED to your computer.
Note: If you see a Found New Hardware screen, click Cancel
and disconnect the USB cable.
2
Insert the NX400 Series CD.
With Windows Vista, if you see the
AutoPlay window, click Run Epsetup.exe.
When you see the User Account Control
screen, click Continue.
3
Click Install and follow the on-screen instructions.
4
When prompted, connect the USB cable. Use any open port on
your computer.
Note: If installation doesn't continue after a moment, make sure you
securely connected and turned on the NX400 Series.
5
Follow the on-screen instructions to install the rest of the software
and register your NX400 Series.
6
When you're done, remove the CD.
You're ready to copy, print, and scan! See the Quick Guide or your
on-screen User's Guide for instructions.
and Mac OS X 10.3.9, 10.4.x, and 10.5.x.
® ®
2000, XP, XP Professional x64 Edition,
®