Asus PCH DR - Motherboard - Extended ATX User Manual page 81

c. Setting to [Enhanced Mode] allows you to install parallel ATA and
serial ATA devices at the same time, with a maximum of six IDE
devices on each channel. Use ths option when you installed a native
operating system like Windows 2000/XP.
d. Setting to [SATA Only] allows you to install IDE devices on the Serial
ATA channels only.
e. Setting to [Disabled] disables the onboard SATA controller. The RAID
feature is also disabled.
For more information, refer to the "Parallel and Serial ATA hard disk
configurations" on the next page.
SATA Mode [IDE]
When this item is set to [IDE], SATA operates in IDE mode. When set to
[RAID], SATA operates in RAID mode. The RAID feature allows
configuration of the installed IDE devices into a disk array. Configuration
options: [IDE] [RAID]
Serial ATA Port0 Mode [SATA0 Master]
Serial ATA Port1 Mode [SATA1 Master]
Allow you to set the SATA Port0 and Serial ATA Port1 modes. The options
for these items vary depending on the setting of the On-Chip Serial ATA
item. Configuration options: [Primary Master] [Primary Slave] [Secondary
Master] [Secondary Slave] [SATA0 Master] [SATA1 Master]
The configuration options for the items Serial ATA Port0 Mode and
Serial ATA Port1 Mode vary depending on the On-chip Serial ATA and
SATA Mode settings.
ASUS PCH-DR motherboard 4-23