Internal Connectors; Floppy Disk Drive Connector (34-1 Pin Floppy); Serial Ata Connectors (7-Pin Sata1, Sata) - Asus PCH DR - Motherboard - Extended ATX User Manual

2.7.2 Internal connectors

1. Floppy disk drive connector (34-1 pin FLOPPY1)
This connector supports the provided floppy drive ribbon cable. After
connecting one end to the motherboard, connect the other end to the
floppy drive.
PCH-DR
PCH-DR Floppy Disk Drive Connector
2. Serial ATA connectors (7-pin SATA1, SATA2)
These next generation connectors support the thin Serial ATA cables
for Serial ATA hard disks. The current Serial ATA interface allows up to
150 MB/s data transfer rate, faster than the standard parallel ATA with
133 MB/s (Ultra ATA/133).
If you installed Serial ATA hard disks, you may create a RAID 0/RAID 1
configuration using the RAID feature of the Intel
to page 4-19 for the SATA configuration.
PCH-DR
PCH-DR SATA Connectors
The Serial ATA RAID feature (RAID 0/1) is available only if you are
using Windows XP.
ASUS PCH-DR motherboard
FLOPPY1
PIN 1
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
®
SATA1 SATA2
GND GND
RSATA_TXP1 RSATA_TXP2
RSATA_TXN1 RSATA_TXN2
GND GND
RSATA_RXP1 RSATA_RXP2
RSATA_RXN1 RSATA_RXN2
GND GND
6300ESB ICH. Refer
2-25