4.3.5 Third IDE Master
When configuring a drive as Third IDE Master, refer to section "4.3.1
Primary IDE Master" for the menu item descriptions which are not
discussed in this section.
Auto-Detection
Extended IDE Drive
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
Transfer Mode
S.M.A.R.T Status
Extended IDE Drive [Auto]
When set to [Auto], allows automatic selection of the extended IDE drive
installed, if any. Set this item to [None] if there is no extended IDE drive, or
if you do not wish to detect the drive even if installed. Configuration
options: [None] [Auto]
Access Mode [Auto]
Configuration options: [Large] [Auto]
4.3.6 Fourth IDE Master
When configuring a drive as Fourth IDE Master, refer to section "4.3.1
Primary IDE Master" and section "4.3.5 Third IDE Master" for the menu
item descriptions.
The items Third IDE Master and Fourth IDE Master appear only in
Enhanced IDE mode. See page 4-19 for information.
4-14
Third IDE Master
[Press Enter]
[Auto]
[Auto]
0 MB
0
0
0
0
0
None
None
Select Menu
Item Specific Help
Selects the type of
fixed disk connected
to the system.
Chapter 4: BIOS Setup