Table of Contents
Advertisement
CPU L1 & L2 Cache [Enabled]
Allows you to enable or disable the CPU L1 and L2 cache. Configuration
options: [Disabled] [Enabled]
Hyper-Threading Technolody [Enabled]
Allows you to enable or disable the CPU Hyper-Threading Technology
feature. Set this item to [Enabled] if you are using an operating system that
is optimized for Hyper-Threading Technology, such as Windows XP or
Linux 2.4. Otherwise, set this item to [Disabled]. Configuration options:
[Disabled] [Enabled]
4.4.2 Memory Configuration
This menu shows the memory configuration settings. Select an item then
press Enter to display a pop-up menu with the configuration options.
DRAM Frequency
Memory Timing Selectable
Cache Latency Time
Active to Precharge Delay
DRAM RAS# to CAS# Delay
DRAM RAS# Precharge
Memory Parity Check
DRAM Frequency [Auto]
This item sets the DRAM operating frequency. Configuration options:
[DDR266] [DDR333] [Auto]
Memory Timing Selectable [By SPD]
The DRAM clock are set according to the DRAM SPD (Serial Presence
Detect). Select [By SPD] for automatic DRAM clock detection. Select
[Manual] to allow setting the succeeding memory items to optimal timings.
Configuration options: [Manual] [By SPD]
4-16
Memory Configuration
[Auto]
[By SPD]
2.5
7
3
3
Enabled
Select Menu
Item Specific Help
Set DRAM Frequency.
Chapter 4: BIOS Setup
Advertisement
Table of Contents
