Config Menu - Lenovo 32597CU User Manual

• System board serial number
• Asset Tag
• CPU Type
• CPU Speed
• Installed memory
• UUID
• MAC address (Internal LAN)

Config menu

If you need to change the configuration of your computer, select Config from the ThinkPad Setup program
main menu.
The following submenu is displayed:
• Network: Set the LAN related functions.
• USB: Enable or disable USB related functions.
• Keyboard/Mouse: Set the keyboard and the mouse related functions.
• Display: Specify the settings for display output.
• Power: Set power management related functions.
• Beep and Alarm: Enable or disable the audio related functions.
• Serial ATA (SATA): Specify the settings for the hard disk drive.
• CPU: Specify the settings for the CPU.
Notes:
• The default settings are already optimized for you. If you consider changing the computer configuration,
proceed with extreme caution. Setting the configuration incorrectly might cause unexpected results.
• On each submenu, you can enable a function by selecting Enabled, or disable it by selecting Disabled.
The following table shows the contents of the Config menu.
Notes:
• Some items are displayed on the menu only if the computer supports the corresponding features.
• Default values are in boldface.
Table 4. Config menu items
Menu item
Network
Submenu item
Wake On LAN
Selection
• Disabled
• AC Only
• AC and Battery
Chapter 7
Comments
Enable the system to Power
on when the Ethernet
controller receives a magic
packet.
If you select AC Only, Wake
On LAN is enabled only
when ac power adapter is
attached.
If you select AC and
Battery, Wake On LAN is
.
Advanced configuration
95