Making A Quick Copy - Epson Stylus CX7000F Series Basic Manual

6. To make multiple copies (up to 99), press the number keys on the numeric
keypad. The display shows the number you select.
Note:
To exit Copy mode, press the
7. Press the paper type button to select
8. Press the paper size button to select
9. To make a color copy, press the x
To make a black and white copy, press the x
appears on the display and the CX7000F Series starts copying.
Printing
If you need to stop copying, just press the y
out paper that is being printed; it will be ejected automatically to the output tray.
Note:
The copies may not be exactly the same size as the original.
When making a lot of copies, it is a good idea to remove the printed copies from the
output tray after every 10 sheets or so.

Making a Quick Copy

If you want to make a copy quickly and do not need high quality, you can print a
"draft" copy. The print quality is reduced, but the copy is printed faster.
1. Load plain, letter-size paper and select
control panel.
2. Press the
Copy
enlarged to fit the loaded paper size, press the
mode.
to Page
3. When you are ready to copy, press and hold the y
press and hold the x
see
Color Draft Mode
on the display.
To make a black and white copy, press and hold the y
then press and hold the x
on the display, release both buttons.
Mode
y
Cancel/Back button.
button. If you want your copies automatically reduced or
Start Color/OK
on the display, release both buttons.
Start B&W
.
Photo Paper
, , or
Letter 4"× 6"
button.
Start Color/OK
Start B&W
Cancel/Back
and
Plain Paper
Copy
Cancel/Back
button (to copy in color). When you
button. When you see
Printing
.
5"× 7"
button.
button. Do not pull
size on the
Letter
button again to select
button, then
appears
Printing
button,
Cancel/Back
B/W Draft
appears on the display.
Copying
Fit
11