Craftsman 211420 Assembly Instructions And Parts List page 4

GRINDER TO LEG SET
To avoid injury, turn the grinder switch OFF and unplug
the Grinder from the power source before mounting
onto the leg set, See Figure 3-1,
1, Position the Grinder (6) (not included) onto the Tray
(1) of the Leg Set,
2, Align the mounting hobs in the base of the Grinder
with the hobs or slot in the Tray of the Leg Set,
3,
Secure the Grinder to the Leg Set with Hex Head
Screws (2), Fiat Washers (3), Lock Washers (4),
and Hex Nuts (5), Tighten all mounting hardware,
See Figure B,
Hex Head Screw (Qty, 2)
Fiat Washer (Qty, 4)
Lock Washer (Qty, 2)
Hex Nut (Qty, 2)
HOW TO ORDER PARTS
Should a need exist for repair, parts or service for this
Bench Grinder Leg Set, simply contact any Sears Parts
Direct at 1-800-366-7278, For product information call
the Customer Helpline at 1-800-897-7709, Please
have your Model No,, Part No,, and Part Description
available,
When servicing, using only Craftsman replacement
parts, Use of any other parts may create a HAZARD
or cause product damage,
Figure 3-1
\
$
Sears, Roebuck and Co.
Ho#man Estates,/£ 60179 U.S.A.
Part No. 0R93516