Craftsman 211420 Assembly Instructions And Parts List

®
Grinq :t
21142q
SAVE THESE ASSEMBLY iNSTRUCTiONS AND PARTS LiST
ONE-YEAR FULL WARRANTY ON CRAFTSMAN TOOL
ff this Craftsman tool fails due to a defect in material or
workmanship within one year from the date of purchase,
CALL 1-800-4-MY-HOME e_ TO ARRANGE FOR FREE
REPAIR.
This warranty applies onIy while this tool is in the United
States.
This warranty gives you specific Iegal rights, and you may
aIso have other rights, which vary from state to state.
Sears, Roebuck and Co°, Dept° 817WA
Hoffrnan Estates, _L 60179
GENERAL SAFETY iNSTRUCTiONS
FOR POWER TOOL
Before using the Bench Grinder Leg Set, read and
understand the instruction Manual,
To avoid serious injury and damage to the tool, read
and follow all of the Safety and Operating instructions
before operating the Power Tool,
1, READ the entire instruction Manual, LEARN how to
use the tool for its intended applications,
2, GROUND ALL TOOLS, if the tool is supplied with a
3-prong plug, it must be plugged into a 3-contact
electrical receptacle, The 3rd prong is used to
ground the tool and provide protection against
accidental electric shock, DO NOT remove the
3rd prong,
3, AVOID A DANGEROUS WORKING ENVIRON-
MENT. DO NOT use ebctdcal tools in a damp
environment or expose them to rain,
4, DO NOT use electrical tools in the presence of
flammable liquids or gasses,
5, ALWAYS keep the work area dean, well lit, and
organized, DO NOT work in an environment with
floor surfaces that are slippery from debris, grease,
and wax,
6, KEEP VISITORS AND CHILDREN AWAY. DO NOT
permit people to be in the immediate work area,
especially when the electrical tool is operating,
7, DO NOT FORCE THE TOOL to perform an opera-
tion for which it was not designed, it wiil do a safer
and higher quality job by only performing opera-
tions for which the tool was intended,
8, WEAR PROPER CLOTHING. DO NOT wear loose
clothing, gloves, neckties, or jewelry, These items
can get caught in the machine during operations
and puil the operator into the moving parts, The
user must wear a protective cover on their hair, if
the hair is long, to prevent it from contacting any
moving parts,
9, ALWAYS WEAR EYE PROTECTION, Any power
tool can throw debris into the eyes during opera-
tions, which could cause severe and permanent
eye damage, ALWAYS wear Safety Goggbs (that
comply with ANSI standard Z87,1) when operating
power tools, Safety Goggles are available at Sears
Retail Stores,
10,
11,
12,
13,
14,
15,
WEAR A DUST MASK TO PREVENT INHALING
DANGEROUS DUST OR PARTICLES,
ALWAYS UNPLUG THE TOOL FROM THE ELEC-
TRICAL RECEPTACLE when making adjustments,
changing parts or performing any maintenance,
KEEP PROTECTIVE GUARDS IN PLACE AND IN
WORKING ORDER,
AVOID ACCIDENTAL STARTING, Make sure
that the power switch is in the "OFF" position
before plugging in the power cord to the electrical
receptacle,
REMOVE ALL MAINTENANCE TOOLS from the
immediate area prior to turning "ON" the Bench
Grinder,
USE ONLY RECOMMENDED ACCESSORIES,
Use of incorrect or improper accessories could
cause serious injury to the operator and cause
damage to the tool, if in doubt, check the instruc-
tion manual that comes with that particular acces-
sory,