EPOS ELS Series Operating Instructions Manual

OPERATING INSTRUCTIONS

Thank you for purchasing Epos loudspeakers.
Please take a little time to read these brief notes, which will
help you get the best from your loudspeakers.
POWER REQUIREMENTS
Amplifiers with power outputs
between those specified will
generally be adequate, although
more powerful amplifiers can be
used if care is taken to avoid
overdriving the loudspeakers.
Use the volume control with
discretion, and reduce the level
immediately if the loudspeakers
begin to distort.
Amplifiers capable of less than 25
Watts per channel output are best
avoided because they will restrict
the dynamic range. They may also
cause damage
loudspeakers if driven beyond
their capability in an attempt to
obtain high volume levels.
The clipping distortion produced
Series Loudspeakers
when an amplifier is driven
beyond
capability can be very destructive.
A powerful amplifier operating
well inside its capability will
generally be less likely to damage
your loudspeakers than a lower
power amplifier operating beyond
its capacity.
Do not
connections to the amplifier when
it is turned on!
POSITIONING
to the
Space should be left behind the
loudspeakers to allow proper
operation of rear firing reflex ports
and to ensure establishment of
good stereo image depth.
its normal output
make or break