TerraTec Aureon 7.1 Universe Manual page 49

4. Recording
To do so, click the
With Sound Rescue TerraTec Edition 2.0, you can, of course, also make recordings.
button and specify a location and name for the resulting WAV file in the dialog box that
opens. You will now see the AlgoRec window, which shows you the input level for the
standard recording device as configured in Windows. T
he recording is still paused .
The AlgoRec recording window of Sound Rescue TerraTec Edition 2.0
Adjust the level so that it never quite reaches 0dB, i.e. the red range. Going into the red range
can cause digital crackling noises, which cannot be completely filtered out by the editing
tools. Clicking the button opens the Windows recording controls.
When you are ready to start recording, simply click the button. You can also use to
pause and again continue recording.
Recording for the file you previously selected is stopped when you click . If you like, you
can now press again to specify a new file and create a new recording.
5. Rescuing Audio Material
This section provides greater detail on how you can edit your recordings.
Restoration
After you have recorded the entire side of an LP, for example, you may want to rescue and
restore the recorded audio material using Sound Rescue TerraTec Edition 2.0. Start playback
with the button. If you enable the button, the DeScratcher and DeNoiser
filters are bypassed so that you can listen to the original recording. Disable the bypass option
to listen to the effects of the restoration filters in realtime. You can adjust the settings of the
DeScratcher and DeNoiser filters during playback and see the difference in the Analyzer while
hearing it at the same time. To hear only the noises and crackling sounds that are being
filtered out of the audio material, click . Adjust the control slider to your liking
and refer to the chapters on the DeScratcher and DeNoiser functions for more information.
Adjust the volume slide so that the peak level never quite reaches the red range. Once you are
satisfied with the results, stop playback by pressing and save the results by clicking the
button. The new audio material is loaded and displayed automatically. To avoid
mistakenly filtering a file that has already been filtered, the bypass option is enabled
automatically.
SoundSystem Aureon 7.1 Universe (English) 49