Fujitsu fi-6130Z Getting Started Manual page 7

3.
Load a document in the scanner.
1. Pull out the chute extensions according to the
length of the document.
2. Lift up the stacker and stacker extensions
according to the length of the document.
3. Load the document face-down in the ADF
paper chute.
4. Adjust the side guides to the width of the
document.
fi-6130Z/fi-6140Z
Side guide
fi-6230Z/fi-6240Z
Chute extension 2
Chute extension 1
Side guide
4.
Start up ScandAll PRO.
Select the [Start] menu
[Fujitsu ScandAll PRO]
5.
Select the [Tool] menu
The [Setup] dialog box appears.
6.
In the [Scan] tab, select a scanner driver
and click the [OK] button.
Select [TWAIN] for TWAIN driver, and [ISIS /
VRS] for ISIS driver or Kofax VRS.
7.
Select the [Scan] menu
Scanner].
The [Select Scanner] dialog box appears.
Chute extension 2
Chute extension 1
Stacker
Stacker extension 1
Stacker extension 3
Stacker extension 2
Stacker
Stacker
extension
[All Programs]
[ScandAll PRO].
[Preferences].
[Select
7
8.
Select a scanner, and then click the
[Select] button.
Make sure to select the scanner model that is
connected to the computer. The displayed
model name varies depending on the driver.
TWAIN
Model
Driver
fi-6130Z FUJITSU
fi-6130Zdj
FUJITSU
fi-6230Z
fi-6230Zdj
FUJITSU
fi-6140Z
fi-6140Zdj
fi-6240Z FUJITSU
fi-6240Zdj
When using Kofax VRS for the first
time, the [Register Kofax VRS] screen
appears. User registration is required
to obtain support information from
Kofax as well as to upgrade the
software, though Kofax VRS can still
be used without user registration.
To register later, select [Start] menu
[All Programs]
[Kofax VRS Administration Console],
and follow the on-screen instructions.
For details, refer to the Kofax VRS
Installation Guide (PDF) which is
included in the Setup DVD-ROM
(\VRS\SVRS\Documentation\).
9.
Select the [Scan] menu
The [Scan Settings] dialog box appears.
10.
Clear the [Save to file] check box.
You do not have to save to file
because this is only a test.
11.
Click the [Scanner Setting] button.
The scanner driver's setup dialog box
appears.
12.
Configure scan settings such as resolution
and paper size, and then click the [OK]
button.
ISIS
Kofax VRS
Driver
Fujitsu
fi-6130Z
Fujitsu
fi-6230Z
Kofax VRS
Scanner
Fujitsu
fi-6140Z
Fujitsu
fi-6240Z
[Kofax VRS]
[Scan Settings].