Disp. Custom Setting; Framing Guidline - FujiFilm X-Pro1 Owner's Manual

v DISP. CUSTOM SETTING v

DISP. CUSTOM SETTING

Choose the items displayed in the optical viewfi nder or in the electronic viewfi nder and LCD monitor (P 21). The following items
can be displayed: framing grid (you can also select the grid type as described on page 71), virtual horizon, focus distance (auto or
manual), histogram, exposure (shutter speed, aperture, and sensitivity), exposure compensation/exposure indicator, metering,
fl ash mode, white balance, fi lm simulation, dynamic range, number of exposures remaining, image size and quality, and battery
level. See pages 6 – 8 for the locations of these items in the displays.
1 Highlight OVF or EVF/LCD and press MENU/OK.
2
Press the selector up or down to highlight items and press MENU/OK to select or deselect. Press DISP/BACK to exit when settings
are complete.
Virtual Horizon Virtual Horizon
Selecting ELECTRONIC LEVEL Selecting ELECTRONIC LEVEL displays a virtual horizon. The camera is level when the two lines over-
lap. lap.
R The virtual horizon may not be displayed if the camera lens is pointed up or down.
c c FRAMING GUIDLINE

FRAMING GUIDLINE

Choose the type of framing grid available in shooting mode.
F GRID 9 F
GRID 9
P
For "rule of thirds" composition.
displays a virtual horizon. The camera is level when the two lines over-
G GRID 24 G
P
A six-by-four grid.
GRID 24
Frame HD pictures in the crop shown by the
lines at the top and bottom of the display.
Using the Menus: Shooting Mode
P
defaults to F F GRID 9)
( ( defaults to
H HD FRAMING H
HD FRAMING
P
GRID 9)
71