Table of Contents
Advertisement
4
Install USB 2.0 Driver
Click <Install Driver> from the main menu and enter the install driver menu (as
shown in fig. 1). Click <USB 2.0 Driver> to open the USB 2.0 setup guide. Please
read the guide carefully and select the relevant installation method. If you want to
know further information, please visit our website: www.foxconnchannel.com.
Using 4-/6-Channel Audio
The motherboard is equipped with the Realtek ALC655 chip, which provides
support for 6-Channel audio output, including 2 front, 2 rear, 1 center and 1
subwoofer channel. ALC655 allows the board to attach 4 or 6 speakers for a
better surround sound effect. This section will tell you how to install and use the
4-/6-Channel audio function on the board.
Installing the Audio Driver
You need to install the driver for the Realtek ALC655 chip before you can use the
4-/6-Channel audio function. Follow the procedures described below to install
the drivers for different operating systems.
Chapter 4 Driver CD Introduction
Click here
1
661M03 Series User Manual
Click here
3
Read this guide
65
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 661M03 Series and is the answer not in the manual?