GE GFDS150EDWW Installation Instructions Manual page 8

ADDING ELBOW AND DUCT FOR
EXHAUST TO LEFT OR RIGHT SIDE OF
CABINET
• Preassemble 4" elbow with 4" duct. Wrap duct tape
around joint.
opening and connect the elbow to the dryer internal
duct.
CAUTION:
Be sure not to pull or damage the
electrical wires inside the dryer when inserting the duct.
EXHAUST CAN
BE ADDED TO
LEFT OR RIGHT SIDE
• Apply duct tape as shown on the joint between the
dryer internal duct and the elbow.
DUCT
TAPE
ADDING ELBOW FOR EXHAUST
THROUGH BOTTOM OF CABINET
• Insert the elbow through the rear opening and connect
it to the dryer internal duct.
• Apply duct tape on the joint between the dryer internal
duct and elbow, as shown above.
CAUTION:
Internal duct joints must be secured with tape,
otherwise they may separate and cause a
safety hazard.
Installation Instructions
DUCT
TAPE
CAUTION:
Internal duct joints must be
secured with tape, otherwise
they may separate and cause a
safety hazard.
ADDING COVER PLATE TO REAR OF
CABINET (SIDES AND BOTTOM EXHAUST)
PL ATE
(KIT WE1M454)
Connect standard metal elbows and ducts to complete
WARNING-
BACK OPENING WITHOUT THE PLATE
(Kit WE1M454).
Please go to www.GEAppliances.com or mail in
your product registration card.
8
NEVER LEAVE THE