GE GFDS150EDWW Installation Instructions Manual page 3

CONNECTING DRYER USING 3-WIRE
CONNECTION
to grounded metal, cold water pipe, or other established ground
determined by a qualified electrician.
Wire according to the terminal block illustration that matches
Hot Wire
Screw
Screw
Strap
ground
screw
Neutral
Screw
Hot Wire
Strain Relief
Screw Hot Wire
Screw
Strap
ground
screw
Neutral
Screw Hot
Wire
Strain Relief
Installation Instructions
minimum
copper
conductors or
power supply
cord kit marked
for use with
dryers and
provided with
Strain
closed loop or
Relief
spade terminals
with upturned
minimum
copper
conductors or
power supply
cord kit marked
for use with
dryers and
provided with
Strain
closed loop or
Relief
spade terminals
with upturned
3-wire Connection
Not for use in Canada.
DO NOT use for Mobile Home Installations.
NOT for use on new construction.
NOT for use on recreational vehicles.
NOT for use in areas where local codes prohibit grounding
through the neutral conduction.
dryer's circuit fuse at the electrical box.
A. Connect the 2 hot lines to the outer screws of the
terminal of block and to green ground screw on cabinet
7. Properly secure power cord to strain relief.
8. Reinstall the cover.
WARNING:
COVER OFF OF THE TERMINAL BLOCK.
NEVER LEAVE THE