Operating Instructions; User Controls - Envision EN-8500 User Manual

OPERATING INSTRUCTIONS

Press the Power Switch to turn the monitor ON or OFF. The other control
knobs are located at the front panel of the monitor. By changing these
settings, the picture can be adjusted to your personal preferences.
•
The power cord should be connected.
•
Connect the video cable from the monitor to the video card.
•
Press the Power Switch to turn ON the monitor. The power indicator will
light up.

USER CONTROLS

No. Name
1. CH
2. CH
3. VOL
4. VOL
5. AUTO/EXIT
6. REMOTE SENSOR
Description
TV or PIP Mode: Change channel down.
OSD Mode: Move down between OSD functions.
TV or PIP Mode: Change channel up.
OSD Mode: Move up between OSD functions.
All Modes: Adjust volume down.
OSD Mode: Decrease value of selected OSD
function.
All Modes: Adjust volume up.
OSD Mode: Increase value of selected OSD
function.
PC & PIP Modes: Automatically adjust the H/V
POSITION, CLOCK & FOCUS to optimal value.
OSD Mode: EXIT from OSD menu. Or return to
previous menu when an OSD sub-menu is active.
Sensor for the remote control.
14
EN-8500