Valet Mode; Enter Valet Mode; Exit Valet Mode; Car Locator - Auto Page C3-RS-727A LCD Operation Manual

Professional 2-way lcd remote car starter & alarm system with built in temperature sensor and two-way serial port data link
Table of Contents

Advertisement

releasing the Valet Switch.
5. Turn the ignition switch "OFF" position. 4 Chirps from siren/horn and 3 flashes
from the parking lights will indicate the system has disarmed.
Note 1: You must override the alarm within 60 seconds. If not, the system will
automatically re-arm.
EXAMPLE: To Override The System With The Password Code 83,
1. Enter the vehicle and turn the ignition switch to the 'ON' position.
(Alarm will sound.)
2. Within 5 seconds, Press and Release the Valet Switch 8 times, (When finished the
system's siren will stop alarming, lights stop flashing, but the vehicle can not be
s tarted or driven away.)
3. Within 15 seconds of entering the last digit code enter (the 1
Switch "Off" and then "ON".
4. Within 15 seconds, Press and Release the Valet Switch 3 times.
5.
Turn the Ignition Switch to the "Off" position. 4 Ch irps form siren/horn and 3 flashes
from the parking lights will indicate the system has disarmed.
K. VALET MODE:
(System in Disarm or Valet mode)
The valet switch allows you to temporarily bypass all alarm function, eliminating the
need to hand your trans mitter to parking attendants or garage mechanics. When the
system is in valet mode, all alarm functions and remote start functions are bypassed,
however, the remote panic feature and remote door locks will remain operational. To
use the valet mode, the sys tem must first be disarmed either by using your remote
transmitter, or by operating the Manual Override sequence.

Enter Valet Mode:

1. From the disarmed condition, turn
the ignition to the "ON" position.
2. Push and hold the valet switch for 2
seconds until the LED turns on. The
LED will remain "on" as long as the
system is in 'valet mode'.

Exit Valet Mode:

1.Return to normal operation, turn ignition 'on'.
2.
Push and hold the valet switch for 2 seconds, The LED will turn off, indicating the
system has exited the valet mode.
L. CAR LOCATOR
Under the armed mode, press the
activate the car locator function. The siren will chirp
6 times. The parking lights will flash 12 times
making it easier to locate your car.
M. PANIC FUNCTION:
The transmitter can be used as a remote panic switch to manually trigger the alarm
in case of emergency.
st
code), turn the Ignition
Remote Door Lock
Remote Door Unlock
button to
15

Advertisement

Table of Contents
loading

Table of Contents