Table of Contents
Advertisement
If You Have Cable or Antenna through VCR...
1.
Make sure the power of X23 LCD HDTV is turned off.
2.
Make sure there is an antenna or cable connection to the VCR already.
3.
Use a Coaxial RF cable and connect from your VCR's video out to the
TV port on the back of your X23 LCD HDTV.
4.
Turn on X23 LCD HDTV.
5.
Select TV for digital cable or antenna from either your remote control's
source button or source button on the right side of the TV.
6.
Use the On Screen Display to scan for channels.
Please Note :
•
Some VCRs require you to turn it on before its output will have
a signal to the TV. Please consult your VCR manual for
further reference.
•
Not all broadcasts are in High Definition (HD). Please refer to
your local broadcasting stations for more information.
•
The X23 LCD HDTV's tuner is designed for HDTV therefore
requires a stronger signal than normal TVs. If you cannot
achieve that signal level with your antenna or cable, your X23
LCD HDTV might lose picture or sound.
- 22 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual
Advertisement
Table of Contents
