Table of Contents
Advertisement
If You have Cable or Antenna...
1.
Make sure the power of X23 LCD HDTV is turned off.
2.
Connect the Coaxial RF cable from your antenna or cable to the TV port
on the back of your X23 LCD HDTV.
3.
Turn on the X23 LCD HDTV.
4.
Select TV (Air) for antenna or TV (Cable) for cable from either your
remote control's source button or source button on the right side of the
TV.
5.
Use the On Screen Display to scan for channels.
Please Note :
•
•
Not all broadcasts are in High Definition (HD). Please refer to your
local broadcasting stations for more information.
The X23 LCD HDTV's tuner is designed for HDTV therefore
requires a stronger signal than normal TVs. If you cannot achieve
that signal level with your antenna or cable, your X23 LCD HDTV
might lose picture or sound.
- 23 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual
Advertisement
Table of Contents
