Table of Contents
Advertisement
If You Want the Fair Connection with Composite...
1.
Make sure the power of X23 LCD HDTV and your set-top box is turned
off.
2.
Obtain a Yellow Video Cable. Connect the Yellow Video connector to
both your set-top box and AV's Yellow Video connector port on the back
of your X23 LCD HDTV.
3.
Obtain a RCA Audio Cable. Connect the white color connector to both
your set-top box and AV's white connector port on the back of your X23
LCD HDTV.
4.
Connect the red color connector to both your set-top box and AV's red
connector port on the back of your X23 LCD HDTV.
5.
Turn on the X23 LCD HDTV and your set-top box.
6.
Use the remote control's source button or the source button on the right
side of the TV to switch to AV (CVBS).
Please Note :
•
•
•
Make sure the yellow connector in the same group is not connected.
You can only connect either the S-Video port or the Yellow
Connector port. DO NOT CONNECT BOTH.
Please reference the set-top box's manual as well, to make sure
the set-top box is configured to output correctly to the TV.
Sceptre's X23 LCD HDTV supports SONY's universal remote
code. Please look up SONY's codes in your universal remote's
hand book.
- 31 -
www.SCEPTRE.com
SCEPTRE X23 HDTV User Manual
Advertisement
Table of Contents
